• 23201 NE 10th Ave, Ridgefield, WA

2021: Snow and Ice at Schurman Machine

We had quite the weather the last few days here in Ridgefield, Wa, with about 8 inches of snow and topped with freezing rain. We are just starting to thaw out from 2021’s version of “Snowpocalypse”. While this weather doesn’t happen often around these parts, we are glad that it has come and gone. A couple weekend snow days to get out the sleds and walk in the winter wonderland were nice, and we hope you all got to enjoy as well. We are back to work and ready to answer your calls for machining and fabrications.

Read More
covid-19

COVID-19 Message

March 12, 2020

As the world continues to monitor the status of COVID-19, Schurman Machine is paying close attention to the situation and enacting the following Policy changes.

Until further notice, we are requesting non-essential personnel (sales representatives or other visitors) from our suppliers to limit visits to an as required basis. Alternative communication methods, such as phone and email, are preferred at this time. If an in-person visit is required and other communication methods are not feasible, please coordinate in advance by calling ahead.

Our common goal is to keep our workforce, suppliers, and families safe and healthy as we navigate the unknowns of this situation. If you have any questions, or concerns, please reach out to the following people.

Owners:

Matt Houghton – matt@schurmanmfg.com
Denise Schurman – denise@schurmanmfg.com

Office Manager:

Corey Cox – corey@schurmanmfg.com

We appreciate your assistance with this matter and we will communicate any policy changes when they are amended.

Thank you,

Schurman Machine

Read More

Alan Schurman Obituary

As a young boy, Alan Schurman’s family collected and restored old tractors, saving them from the junk man. In 1950, Alan’s father, Paul Schurman held the “First Steam Threshing Bee on the West Coast,” displaying and operating old farm equipment. In 1951, Alan’s uncle, Clyde Schurman and his father, Paul Schurman, saved and restored a rare Compound Russel Steam Traction Engine, documented in an article published in Iron-Man Album magazine of July 1951. Alan was only eight years old in 1950, just a spectator. Over time, his father’s and uncle’s love of old machinery became Alan’s passion.

Alan graduated from the Oregon Institute of Technology, Klamath Falls Oregon, with a degree in Engineering, and became a teacher at Clark College in Vancouver. Years later, Alan became the manager of the Schurman family machine shop, founded by his father. He worked there until retiring, then used his engineering and metal fabricating skills to restore antique tractors and engines. He also collected old iron. Starting in 1995, Alan hosted the “Antique Tractor, Engine Show and Flea Market,” held annually in July at the Schurman Iron Ranch, Ridgefield, Washington. In 2016, Alan was elected to the National Early Day Gas Engine and Tractor Association, Hall of Fame, “honoring those who have made significant contributions to the collection, preservation, and exhibition of antique tractors, engines, and equipment.”

Alan’s skill in restoring rare tractors to original condition was widely known. Tractors restored include those made by; Holt, Best, Yuba, Samson and Bean. Recent projects include a 1918 Holt 120hp Caterpillar, and a 1917 Samson Sieve-Grip tractor. Alan’s most ambitious project, started seven years ago, was the reconstruction of three large Best 75hp tractors, each weighing 14-tons. Alan started with just half of the needed parts. He fabricated all missing parts, including the; sprockets, transmissions, final drives, tracks and frames. One tractor required the construction of massive 7.5 foot diameter wheels. This monumental project was nearing completion when Alan passed. In restoring old tractors, Alan’s skills were legendary; both as an engineer, and as a machinist and welder. He was loved and deeply appreciated by those that knew him, and respected by all who shared his passion for old machinery. He was a man of integrity, honesty, a man willing to share his knowledge and willing to help others.

Someone that will be sincerely missed.

Read More

Chevalier FVL-1600VTC – CNC Vertical Lathe

Chevalier FVL-1600VTC – CNC Vertical Lathe w/ C-Axis & Milling

The series is perfect for heavy-duty turning, milling, boring, grinding, drilling and thread-cutting applications. The Y model is designed for key-slot milling of large-sized and/or heavy work pieces or work pieces made of east-iron, steel and cast iron. And with the optional live tooling function, the series offers additional flexible machining capabilities to make more complex work pieces with one machine.

Specs:

  • Table Diameter: 63″
  • Max Swing/Cutting Dia: 78.7″
  • Max Turning Height: 53″
  • Max Table Load: 22,000 lbs.
  • Spindle Speed: 25-2500RPM
  • Z Axis Stroke: 35.4″
  • Y Axis Stroke: 39.4″
  • W Axis Stroke: 31.4″
  • Z Axis Rotation Speed: 3.33RPM
  • C Axis Cutting Feedrate: 0-1200 degrees/min
  • XZ Axis Rapid Traverse: 393ipm
  • Y Axis Rapid Traverse: 236ipm
  • XYZ Cutting Feedrate: 51ipm
  • Box Way Structure
  • Table Size: Up to 1998.9mm (78.7″)
  • Max. Workpeice Weight: Up to 12,000Kg (30,000 lbs.)
  • Transmission: 2-Speed Gearbox
  • Table Motor: Up to 75kW (100 HP)
  • Live Tooling, C-Axis and Y-Axis Available
  • Tool Capacity: 12 Carousel – VTC Series
  • 16 Carousel – VTC+C Series
  • X/Z-Rapid: 10 m/min (393ipm)

For further information about our capabilities, please contact us.

Read More

New Nomura CNC Horizontal Boring Machine

Nomura HBA-135P-R5

CNC Planer Type w/ Rotary Table Horizontal Boring & Milling Machine

We currently are installing this machinery and expect it to be up and running in Early December 2013. For further information about our capabilities, please contact us.

Specs:

  • Spindle Dia. 5.31”
  • Spindle Speed 3,000 rpm
  • X/Y/Z Travel 118”x 90”x 55”
  • Spindle Travel 27.5”
  • Table Size 71”x 79”
  • Load Capacity 33,000 lbs
  • Drive Motor 60 HP
  • Torque 2,922 ft.lb.
Read More

Open House – Sept 14th

As an appreciation to all of our customers, long-time, new, and prospective, we would like to extend an invitation to our open house.  The event is on Friday, September 14th, between the hours of 11am and 2pm.  We will have food in the form of sandwiches, fruits, salads, and drinks on hand.

We will have three of our machines highlighted for the open house:

  • Makino A99 CNC HMC
  • Femco BMC-11CR2 CNC HMC
  • Cincinati Vertical Boring Mill

We will be doing demonstrations on these machines, as well as showing the type of work that we do at our shop.

There will also be a raffle for prizes at the end of the open house, with gifts including gift cards, local wines, and such.

If you are interested in showing up to our event, we welcome you to send us an e-mail to corey@schurmanmfg.com, letting us know you will be showing.

Read More